Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
This item does not fit your vehicle
2020 Chrysler Pacifica
These items fit your vehicle
2020 Chrysler Pacifica
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Imagine a trailer hitch that blends effortlessly with the design of your vehicle, requiring no welding or special tools for installation. The Curt Trailer Hitch Receiver offers a custom fit specifically engineered to match your vehicle, ensuring a precision fit. With simple bolt-on installation and inclusive hardware, setting it up is a straightforward process - making it a no-brainer for DIY enthusiasts.
For those who need durability as well as aesthetic appeal, this trailer hitch delivers with its fully welded, gloss powder coated steel construction. This finish is not just for looks; it offers extraordinary resistance to rust and corrosion, prolonging the lifespan of your hitch while maintaining a sleek appearance. Whether it’s rain or shine, this hitch is built to withstand the elements.
When you need a reliable hitch for your light-duty towing needs, the Curt Trailer Hitch Receiver has you covered with a Class II rating. It boasts a maximum gross trailer weight of up to 3,500 lbs and a tongue weight capacity of up to 350 lbs – more than sufficient for transporting small boats, bikes, or cargo carriers. Designed to support dynamic towing requirements, this hitch brings reliability to every journey.
Precision matters, especially in towing elements. The hitch's robotic welding not only maximizes strength but also enhances overall fit. This technique ensures each hitch is uniformly strong and possesses a high tolerance for dynamic driving conditions. Feel confident knowing your gear is securely attached, mile after mile.
The Curt Trailer Hitch Receiver comes with a comprehensive hardware kit and installation instructions that simplify the setup process. You won't need to scramble for the right tools or second-guess your installation steps. For those handy with tools, this hitch is grounded in ease of use so you can focus more on planning your next adventure rather than troubleshooting installation headaches.
Unfortunately, my otherwise reliable friend decided to elope earlier this month, and will be gone until late July. So, I set about installing this Curt C12170 by myself, slowly and carefully. My CX-5 is brand new; I was very careful. I used the Lisle muffler removal tool and silicone spray. (Don’t buy a cheapie muffler tool – they snap. Go for the Lisle or better). After two days, I gave up. I made it to Step 7, but lifting the receiver into position is a two-man job. I could not lift it, move the electrical wires out of the way, and pull the bumper cover back all by myself. The Good News: My nephew dropped by July 13 and helped me install the hitch receiver. It took us about 20 minutes to lift the receiver into position, fish the bolts through, and put the front bolts into the frame finger tight. It took me another 45 minutes to tighten and torque the hardware, zip tie the electrical cables, and rehang the muffler.
Now that it is installed, it looks great. I have mounted a Draftmaster trike rack and they function well together.
Eric P.
7/26/2024
The Curt C12170 is working out great after a year. I forgot to mention that I was 73 years old when I installed it. It would be even easier for a younger person.
Installation on 2025 Mazda CX5 went without problems. Hitch fit as expected, easy install. Added hitch to my vehicle basically to carry a bike rack. This is the second I've purchased from etrailer and so far both have installed without issues and have performed very well. Good job to all at etrailer!
I didn't personally install this hitch, but was told it was very straightforward and easy. I did the wiring myself and only had issue getting through my firewall.
Have towed my trailer a number of times, no issues at all. Very satisfied.
Charlie
7/18/2025
Works like a champ still. I do only use it maybe 12 times a year.
Truly impressed- Great product at a great price.
My installation took about 3 hrs, compared to the 50 minutes shared in the online directions. That said, I did the installation using floor ramps, vice having the vehicle up on a lift, so I had to wrestle more awkwardly because I was laying on my back vice standing up.
And in my case, I had a very hard time getting the back bolts installed first, so I switched things up and installed the front bolts first, and then used a floor jack to jack up the back part of the hitch (pivoting on the front bolt) to get it closer to the correct height for the bolts to be pulled through.
That said, the Installation Video was VERY HELPFUL, and I am very pleased with the product, and the entire interaction with etrailer.com!!
(sorry for the lousy photos... just wanted to show that I actually did the installation)
This was my fifth (sixth?) etrailer hitch to install, since 2004. For a 2025 CX-5 Select, the instructions were spot-on. All details were accurate, and the installation of the hitch proceeded well. I had to install the hitch alone, using wooden 2x4s to lever the hitch upward using my feet while my hands were maneuvering the bolted connections into place. Taping the flat washers temporarily in position was a key instruction, so that they end up sandwiched between the hitch and frame. The greatest reluctance I had was to pull the plastic bumper panel backward, lapping it over the hitch bar at each side. Scary, but necessary.
The wiring kit was also completely accurate. Pulling apart the trunk trim was a true pain, but necessary to access the taillight connectors on each side. It was only necessary to loosen the side panels enough to reach in to each connector mounted behind the taillight areas. My one mistake was to mount the signal controller too soon, and I found it best to be mounted on the frame member, just under the taillight connector. One 8mm nut with star washer is needed to add the power wire to the existing battery 'bus' that Mazda provides at the battery.
The most important part of this hitch purchase was the excellent customer service I received from William S. Quick responses to questions and helpful resolution of the install. The value of these Curt hitches is also important as well as the ease and good fit of the installation. Ready for more bike rides now! This is the second hitch I've purchased from etrailer and both experiences have been great.
I found Etrailer's site and service to be excellent as usual. I did find that the Mazda CX 5 hitch C12170 fit so tight to the frame of the vehicle that it was not possible to install the wire pulled bolts until after the hitch was in place.
Pretty straight forward installation. A little maneuvering required and minor interpretations to directions depending on vehicle year. This is on a 2015 Mazda CX-5 and will be used for a bike rack and luggage rack. Very pleased with my purchase.
Daniel
7/17/2021
Still going strong. I has been used with a cargo carrier and regularly carries a bike rack.
Great product , good fair price, and very fast shipping
The hitch was shipped in a box that it did not fit in. I was a bit surprised to see both sides sticking out. The hitch did fit fine on the vehicle and the harness was all intact considering the box had holes on both sides. Excited to start making use of it.
First time self installer without professional equipment (car lift, power tools, etc.) should anticipate more than 20-40 minutes installation time. Well built, quality product that fits perfectly. I ordered the hitch through their customer service. Vanessa was very knowledgeable, answered all my questions and was helpful in making the right choice. The hitch arrived promptly. The etrailer video installation instruction was very helpful which I followed over the factory instructions. I installed the hitch in my garage, on the floor and by myself which took about 90 minutes. I would recommend having a helper which would likely reduce the installation time.
My order came quickly via UPS; the package was in good condition at delivery. The hitch was packaged carefully and all the parts were there. The instructions were complete but could have had more clearer illustrations that were easier to read. The install wasn't difficult and I was able to do it in an hour with a set of extra hands. Overall, the product is well made and worth the money spent. I also purchased a Tee wiring harness. I either missed the description or it wasn't there but a note about whether you need a POWERED or unPOWERED connection depending on your needs would have helped. I fortunately purchased the correct one.
Shipped quickly in a ginormous box that was a little intimidating at first, lol. But-it was to protect the hitch! Looks great!
Works great. Thanks
Delivery was top notch! Instalation was easy on our 2016 Mazda CX-5 and after a year and a few camping trips it shows virtually no signs of wear and tear.
This video showed me a very simple way to remove the muffler hangers instead of trying to use a pry bar or large screwdriver. Cannellock pliers did the trick. Only have to remove the bottom hanger pin on all four of them and then just turn them up out of the way.
It is a great hitch. This is the third one I bought for the three CX-5 cars I have owned. It is well made and a breeze to install.
I managed to complete the install without drawing blood!
I installed it without help and without the cx5 off the garage floor. It wasn’t as easy as it would have been with a helper but I got it.
All the holes aligned perfectly and all the bolts were exact.
Now I need the wiring harness which I thought came with the hitch I ordered but not so. I’m sure I read things wrong or simply ordered the wrong one.
Brooke M.
4/20/2024
Thats awesome about the install - bet it feels nice to do that yourself! Glad it went well! Also, wiring harnesses are sold separately. Part # TK85VR is what you would need if you still need one.
My Curt Hitch is perfect in fit, finish and application. It solves the
problem of transporting and launching a 15' Alumacraft fishing boat. etrailer's price and advice are better by far than others, and include
excellent instructions plus videos if needed. This is a well engineered
product sold by very detail orientated professionals. I can honestly
say that I'm thrilled to find etrailer and highly recommend them.
Robert D.
6/4/2019
Perfect ! Dont even notice it, till I use it !
I'm a healthcare provider with minimal mechanical experience and was able to follow the videos and instructions to complete the installation without issue. The hitch on my 2016 CX-5 has towed my 16' aluminum boat well and I couldn't be more satisfied.
Great product. Easy to install
Having had a Curt custom hitch on my previous vehicle, I ordered one for my new 2020 CX-5, expecting similar quality. As before, the installation instructions were clear and easy to follow. The hitch fit perfectly, holes lined up exactly where they needed to be, and the finish seems to be even better than my previous one, appearing to be a heavy, baked-on powder coating. After a year it still looks great and although I don't pull a trailer frequently, it's nice to have it there for when I do. I couldn't be happier with this product!
I installed this trailer hitch to my new 2020 CX5. It took about 2-3 hours to install the complete hitch and wiring. I followed the video on installation and how to wire. No special tool require other than a torque wrench. now you may think this was a long time to install. but I am older than 75. Great Hitch!
Hitch and other ordered products arrived quickly and in good condition. Hitch was carefully packaged to prevent damage. Well done. Have not had time to install yet and will be doing this solo. Install package looks very well thought out, instructions are clear, accurate, and well illustrated. Note: I ordered some etrailer brand rubber hitch plugs (one for another car with 1.25 inch hitch) and I think these are well worth the low cost to give the job a more finished look and maybe keep grit out of your hitch when you back into dirt piles. If possible, I will update review after the install. So far I've spent about an hour gathering tools, checking kit for completeness, and removing the tape from holes in frame. My car lacks the rear plastic strip that is on some CX5s. The forty minutes for novice install might be a tad optimistic unless that's just to toss up the hitch and bolt it, not counting related activities.
Quick install and good instructions. Fifth one I’ve done so far.
My CX-5 has the optional trim on the rear valence. I thought this might need to be removed based on comments about Grand Touring trim needing to be removed. It fit fine.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Eric P.
7/26/2024
The Curt C12170 is working out great after a year. I forgot to mention that I was 73 years old when I installed it. It would be even easier for a younger person.